Code Search
Please fill the "Code Box" to find engine fault code.
All Engine Codes |
The all list of engine trouble codes. |
P244c Engine Diagnostic Code For 2011 135i
P244c engine code for 2011 135i provides below are generic codes that may not apply to all vehicles. 2011 135i manufacturer uses specific 2011 135i diagnostic code that are different from the codes shown below. Foreign vehicles may also use DTC codes different from the generic DTC codes. |
P244c engine diagnostic code is about in terms of how often you should get your tyres rotated, it's different for every vehicle and type of tyre, but having them rotated at every oil change is a good rule of thumb. Check with the tyre manufacturer for a more specific time frame. Remember that the more often you rotate your tyres, the more evenly they'll wear, and when you have the tyres rotated, you should also get them checked for balance and alignment.
P244c Diagnostic Trouble Code For 2011 135i Meaning
0 | 2 | 4 | 0 |
---|---|---|---|
Powertrain Problem | MFG - Manufacturer Specific | Auxiliary Emission Controls | 4c Engine Fault Code |
Starting letter 0 diagnostic code shows that there are problems in engine, transmission and emissions systems.
If your "Check Engine Light" is on, it means your vehicle has one or more OBD II Trouble Codes so you have to check your engine diagnostic code tool.
If your vehicle is an older model with a non-electronic Auxiliary Emission Controls, you can check the distributor cap to see whether the spark is getting from there to the coil and on to the spark plugs.
Don't forget ! If your P244c engine code not resolved on and there are trouble codes in your computer, your vehicle will not pass an OBD 2 emissions test. The light must be off and there must be no codes in memory to pass an OBD 2 emissions test. In addition, all of the OBD II self-monitors that check for faults must have run and completed without finding any further problems to pass the test.